.jpg)
- AUTOMA Valve & Automation
- EUROTEC Actuator Accessories
- GP Solenoid Valve
- KOSAPLUS Pneumatic & Electric Actuators
- PARKER Store
- SKP Air~Treatment~Equipment
- TISSIN Valve Positioner
- VEE-LOK Instrument Valve
- YPC Pneumatic Valve
.jpg)
TTS Valve Technologies Sdn Bhd
24, Jalan TS 6/9,
Taman Industri Subang,
47510 Subang Jaya,
Selangor, Malaysia.
+603-5621 8811
+603-5621 3278
+6016 2165900 (Accounts) +6016 2115600 (Local sales) +6018 3727000 (Outstation) +6018 5727000 (Support) +6018 3287000 (Store) +6018 3987000 (Complaints)Tank Water Control Valve, BSPT 1/2" ~ 2", #TB15~50
| Previous | 2 / 3 | Next |
APPLICATION:
· Water tank,water tower, water pool,Irrigation,animal drinking, Spray equipment,swimming pool etc.
· Working pressure 1-10bar
· Adjustable water level 50mm to 2.5m
ADVANTAGE:
· High flow. Ideal for all makes and models of tanks.
· Available inlet sizes.Keeps pump operation to a minimum.
· Start and stop levels can be easily adjusted to give water level differentials from 50mm to 2.5m.
· Valve Seal Access System for quick access to valve seal.
WORKING PRINCIPAL:
· The valve mounts at the top-side of the tank. It fits easily through a thin walled tank or screws into a threaded tank inlet.
· As the tank empties, the float travels down the cord until it hits the level stopper. The valve then opens immediately to give a full flow.
· As we discharge the water, the valve now runs constantly and the float rises until it hits the level adjuster. This lifts the arm and the valve shuts down.
· Observe the pressure that your pump runs at while the tank is filling. Set the pressure switch to turn the pump off at a pressure at least one bar above the running pressure.
